MakerLab Tools & Equipment
The Cline Library MakerLab offers a wide selection of tools and equipment available to all users for in-library use, including 3D scanners and a fully stocked tool bench. We also have a variety of lending equipment available for check out.
3D Printing & Scanning
-
Prusa CoreOne L+ Tab Open
-
Prusa CoreOne+ (Gen2) Tab Closed
-
MakerBot Replicator+ Tab Closed
-
Ultimaker S7 Tab Closed
- Build Volume: 300 × 300 × 330 mm (29.7 Liters) | 11.8 × 11.8 × 13 inches
- Filament Diameter: 1.75 mm
- Print Materials: PLA and PLA blends, PETG, ABS/ASA
- Layer Height: 0.05 – 0.30 mm
- Nozzle Diameters: .25 mm / .4 mm (default) / .6 mm
- Max Nozzle Temperature: 290 °C / 554 °F
- Max Heatbed Temperature: 120 °C / 248 °F
- Max Chamber Temperature: 60 °C / 140 °F (Active Convection Chamber)
- Build Volume: 250 × 220 × 270 mm | 9.8 × 8.6 × 10.6 in
- Filament Diameter: 1.75 mm
- Print Materials: PLA and PLA blends, PETG, ABS/ASA
- Layer Height: 0.05 – 0.30 mm
- Nozzle Diameters: .25 mm / .4 mm (default) / .6 mm
- Max Nozzle Temperature: 290 °C / 554 °F
- Max Heatbed Temperature: 120 °C / 248 °F
- Max Chamber Temperature: 55 °C / 131 °F
- Build volume: less than 11.6″ X 7.6″ X 6.5″
- Print material: 1.75 mm PLA
- Resolution: up to .1 mm
- Nozzle diameter: 0.4 mm [0.015 in]
- Build volume: less than 12.9″ X 9.4″ X 11.8″
- Print material: 2.85 mm PLA & TPU
- Resolution: up to .1 mm
- Nozzle diameter: 0.4 mm [0.015 in]
More Equipment
The Fellowes Saturn 3i 125 Laminator is a hot laminator for 3-mil or 5-mil A4 pouches. Users must bring their own laminating sheets.
The Fellowes Star 150 Manual Comb Binding Machine manually punches up to 10 sheets at a time and binds
up to 150 sheets with a 3/4 inch comb. Plastic binders are available in the MakerLab.
The Lumina Light Box is a 18”x24” light box used for viewing transparencies or slides and is ideal for tracing, calligraphy, and more.
There are multiple sewing machines available in the MakerLab, along with donated fabric, fabric scissors, thread, and other materials needed for sewing projects. User manuals for these machines are available in physical format in the MakerLab, or on the Creating @ Cline LibGuide
Tools
- 5-3/4″ Needle Nose Piers
- 4-3/4″ Long Nose Pliers
- 4-3/4″ Bent Nose Pliers
- 4-1/4″ Diagonal Cutting Pliers
- 4-3/4″ Flat Nose Pliers
- 4″ End Nipper Pliers
- Clamp 12″
- Clamp 6″
- Clamp 4″
- Vice
- Digital Caliper
- 12″ Steel Ruler
- Carpenter’s Square
- Combination Square 12″
- Multimeter
- Dremel Tool Kit (30 pieces)
- Clippers
- 7″ Multipurpose Scissors
- Precision Knife Set (56)
- Crimper/Wire Stripper/Electrician Pliers
- Multipurpose Office Scissors w/Bottle Opener
- Putty Knife 2″
- Cen-Tech Digital Multimeter
- Drill Master Heat Gun
- Hakko FX-888D Soldering Station
- Hakko FA-400 Smoke Absorber
- Desoldering Wick
- Helping Hands
- Solder Wire
- 5/16×6″ Flat Head Screwdriver
- 2×5″ Phillips Screwdriver
- 1/4×5″ Flat Head Screwdriver
- #1×4″ Phillips Screwdriver
- 3/16×4″ Flat Head Screwdriver
- #0x3″ Phillips Screwdriver
- 1/4×1-1/2″ Flat Head Screwdriver
- #2×1-1/2″ Phillips Screwdriver
- Tack/Finish Hammer 7oz
- Claw Hammer 16oz
- Glue Gun
- Glue Sticks
- Super Glue